CRMAVLiveSoundPASystemsRecordingMixingMasteringDJmusicEquipmentDigitalPianosKeyboardsSingingSongwritingMusiciansNewsGuitarsMusicGearBassMusicGearDrumsMusicGear
Gear Studio Digital Studio Workstation Microphones Preamps Monitors Mixers Recorders Used Software Plugins VSTi Computer Windows Macintosh Sound Cards Audio Interfaces Keyboards MIDI Synthesizers
ManufacturersBehringer Samson Yamaha Roland sE Electronics Digidesign Korg Alesis Shure Boss Mackie Akai M-Audio AKG Fostex Tascam Steinberg Edirol Rode Audio Technica Sennheiser Cakewalk Native Instruments

Twitch DJ

CS Mic

iStomp Gitaar

XP150 PA

sE 2200a II Mic

Studio GT

UltraNova Launchpad

Saffire 40

AirLine MICRO
European Music Shops
Save on USB Microphones, Studio Microphones, Wireless systems and other PRO audio Gear!

Europe Gear Shop USUSA

MIDI Sequencing Basics and Programming

Easy Guitar Method 1 - Acoustic and Electric Guitar Course
Buy Used/Cheap/new
Audio Basics, Sound and Recording
audio,frequency,microphone,cable
Recording/Mixing/ Mastering/Producing
Recording, Mixing, Mastering, Producing and Live Sound for beginner and PRO
Sequencing and MIDI
Learn how to sequence MIDI and songs
Share on: Follow us on

TL Audio Ivory 5052 Stereo Valve Processor preamp compressor valve EQ limiter

NAMM 2003 sees the world debut of the new 5052 Stereo Valve Processor, which is the latest addition to the Ivory 2 series from TL Audio. The 5052 provides everything you would expect from a high quality 'channel strip' product, and then doubles it - making it the ideal system front end and the perfect stereo mixdown and mastering device. While most channel strip products provide a single mono channel made up of single preamp, dynamics and EQ stages, the 5052 provides two channels of each with independent stereo linking of the compressor, EQ and limiter sections. Recording a stereo source to hard disc through the 5052 becomes simplicity itself, yet when it comes to mixdown the 5052 come into its own by offering full stereo linked EQ and dynamics, allowing unparalleled processing of the stereo mix buss signal while recording to 2-track.

Each channel of the 5052 boasts a valve preamp stage, a valve compressor, a four band valve EQ section and a peak optical output limiter, with the following features:

* Valve preamp stage accepts mic, line and instrument inputs with variable input gain, 90Hz filter, 30dB pad and phase reverse.
* Valve compressor section offers variable threshold, ratio, attack, release and gain make-up controls, with hard and soft knee modes.
* Valve EQ section features swept LF and HF bands switchable between peaking and shelving modes, and two fully parametric mids. The EQ can be switched 'pre' or 'post' compressor, and can also be switched into the compressor sidechain for frequency conscious compression.
* Optical output limiter provides transparent brick wall limiting of the output signal, and provides a variable threshold control.
* VU metering is provided for the input & output levels, and the gain reduction of the compressor and limiter stages can be separately monitored. A '+10dB' setting attenuates the meter reading to allow high input/output levels to be accurately tracked.
* The compressor, EQ and limiter stages can be individually stereo linked, so that channel A becomes the master and channel B is slaved to it.
* An output level control is provided, and a complete 'system bypass' switch allows A-B comparison of the original and processed signals.
* Full connectivity is built in, with balanced mic & line ins/outs (duplicated on unbalanced connectors), balanced inserts, compressor sidechain inserts and front panel instrument inputs. The optional DO-2 digital card can be fitted, and this provides 24 bit A-D conversion of the unit's main outputs, with switchable 44.1/48kHz sample rate and a wordclock input.

The 5052 utilises six triode valve stages shared between the two channels, run from a high quality internal 150V stabilised DC supply.

Similar Products

:: Can't366785 ex statement: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ') LIMIT 10' at line 1 SELECT manufacturer,name,filename,crmdir,unique_id,europrice FROM products WHERE crmdir REGEXP '.' and prices REGEXP '.*(zz|mu):[[:digit:]]{1,}.*:.*' and () LIMIT 10

Hot deals, lowest prices on all your pro audio gear and instruments. EU.MusicianUniversity.com

[Contact] [©1999-2012 RecordingMixingMastering.com All rights reserved] [Advertising]